Presilhas e dragonas - Shoulder tabs and epaulets

Português
English (uncheck the other box and check this one)
… Se é que lhes podemos chamar isso, pois têm uma forma muito invulgar, se forem feitas de acordo com as instruções, e foi assim que as fiz, para o bem ou para o mal. Passemos então a analisar os passos das instruções:

“Confeccionar trabillas, cosidas e vueltas dejando abierto el espacio entre señales X-S…”

Confeccionar presilhas cosendo-as e voltando-as, deixando aberto o espaço entre sinais X-S (podem ver uma das presilhas antes de a voltar para o direito e outra já pronta):

“…y colocar sobre charreteras según las mismas señales y en posición hacia la doblez de estas, hilvanar,…”

… e colocar sobre as dragonas de acordo com os mesmos sinais e posicionadas em direcção à dobra de estas (a dobra é o centro da peça das dragonas), alinhavar…

“…doblar carreteras derecho con derecho y cerrar extremo y lado quedando sujetas las trabillas,…”

… dobrar as dragonas direito com direito (pela linha de dobra) e coser extremo e lado, prendendo as presilhas,… Vejam que as presilhas só devem ficar presas na costura de união, daí a ponta da presilha estar a espreitar pela abertura

“… girar…”

...voltar para o direito…

“… y colocar charreteras sobre la espalda según señal R en posición hacia la base del cuerpo.”

… e colocar as dragonas sobre as costas segundo o sinal R em posição na direcção da base do corpo.

“Coser un canesú a la espalda quedando sujetas las charreteras,…”

Coser o espelho (encaixe do ombro) às costas, prendendo as dragonas,…

NOTA: Por causa do reforço das costas tive que unir a costura central das costas primeiro. Na figura seguinte podem ver o avesso do trabalho:

“… coser canesú a delanteros, dejando sueltas las charreteras, fijar estas delante en plano con un punto a mano en los extremos.”

… coser os espelhos às frentes, não prendendo as dragonas; fixá-las sobre a frente com pontos à mão nas extremidades.


No final das instruções é dito para fixar as presilhas à gola com um botão. E é isto! Na minha opinião as presilhas estão um pouco compridas, mas poderei fixá-las dando a volta por cima da gola e cosendo-as no interior. No próximo post já mostrarei o casaco pronto, pois sei que estão ansiosas…

… if we can call them that, because they have an unusual shape if made according to the instructions as I did. Let’s break down the Spanish instructions then:

“Confeccionar trabillas, cosidas e vueltas dejando abierto el espacio entre señales X-S…”

Make the tabs sewing and turning them, leaving the space between marks X-S open (in the picture you can see one finished tab and the other one just before turning to the right side)

“…y colocar sobre charreteras según las mismas señales y en posición hacia la doblez de estas, hilvanar,…”

… and place them on the epaulets according to the same marks, facing the fold line; baste in place (I used pins instead).

“…doblar carreteras derecho con derecho y cerrar extremo y lado quedando sujetas las trabillas,…”

… fold the epaulets in half along the fold line, right sides facing, and stitch the extremity and the side, sewing over the tabs inside. Note: the tabs should only get caught between the marks X-S, that’s why you see the tab tip peeking outside)

“… girar…”

... turn to the right side…

“… y colocar charreteras sobre la espalda según señal R en posición hacia la base del cuerpo.”

… and place the epaulets over the back according to the R mark, facing the base of the bodice.

“Coser un canesú a la espalda quedando sujetas las charreteras,…”

Sew the yoke to the back, catching the epaulets in between…

NOTE: Because I added a back shield, I had to stitch the center back seam on both back and back shield first. Here’s the view from the wrong side:

“… coser canesú a delanteros, dejando sueltas las charreteras, fijar estas delante en plano con un punto a mano en los extremos.”

… stitch the yoke to the front, leaving the epaulet free; tack them down to the front by hand along their extremities.


In the end the instructions mention sewing a button on the tab and collar together. And that’s it! In my opinion the tabs are a little too long and I plan on folding them over the collar, stitching them to the inner collar. And, of course, I will sew the button in place too. Next I will show you the finished coat because I know you are dying to see it!

Encaixe da frente – Front armhole/shoulder inset

Português
English (uncheck the other box and check this one)

Este artigo é especialmente direccionado às principiantes e explica como unir uma parte côncava a uma convexa; as partes a unir estão na figura acima.

Antes de prosseguir, queria chamar a atenção para as guias de coser da máquina de costura, presentes na maior parte dos modelos; estas guias servem para coser a uma distância pré-definida da orla, desde que façamos a orla coincidir com a linha correspondente. Para 1,5cm a guia está assinalada com uma bolinha (vejam na figura seguinte, estou a apontar para a guia dos 1,5cm com uma agulha):

Isto quer dizer que se fizer coincidir a orla com esta guia, com a agulha na posição central, os pontos ficam exactamente a 1,5cm da orla. É por isso que normalmente acrescento margens de 1,5cm (os moldes americanos já vêm com estas margens incluídas e não preciso de as acrescentar).

Passemos então à aplicação do encaixe… A primeira coisa que se faz é reforçar com um pesponto a orla côncava; para isso quero fazer um pesponto não a 1,5cm mas um pouco menos. Vou continuar a usar a guia dos 1,5cm, mas para o pesponto ficar um pouco para dentro (cerca de 1 a 1,5mm), vou mover a agulha para a direita. Notem a configuração da agulha no mostrador; a agulha no centro corresponde a 3,5 e eu coloquei a 4,5:

Assim posso coser guiando-me pela guia, sabendo que o pesponto fica a 1,35mm da orla. A parte curva convexa fica assim reforçada e preparada para o passo seguinte:

Agora golpeamos a curva até ao pesponto, como mostrado na figura:

Estes golpes servem para ao juntarmos as duas peças a unir, direito contra direito, a peça côncava poder adaptar-se à forma convexa, abrindo pelos cortes; as duas peças são unidas primeiro com alfinetes:

E cosidas (atenção, não se esqueçam de colocar a agulha no meio – posição 3,5 – pois agora queremos coser a 1,5cm da orla, um pouco à esquerda do pesponto anterior):

Eu quero assentar os valores de costura na direcção do encaixe e por isso vou ter de golpear em V os valores de costura do encaixe, para eles poderem virar para dentro sem ficarem franzidos:

Agora podemos alinhavar as margens para o lado do encaixe, e depois assentar a ferro:


Finalmente passa-se um pesponto decorativo no lado direito e retiram-se os alinhavos:

Do lado do avesso convém escalar os valores de costura para reduzir o volume:

E é tudo por hoje! Até breve!


This article is specially aimed at the beginners and it explains how to join a concave piece with a convex piece. The pieces in question are shown above.

Before proceeding, I want to address the sewing machine stitching guides and how to use them. Most sewing machines have these guides and their purpose is to guide the stitching at a given distance from the edge. The 5/8” mark is the one that I’m pointing at using a needle:

If I use this mark as a guide, I’ll be stitching at 5/8 from the edge, IF the stitching needle is at normal position (centered).

I want to stitch a little to the right, so I will move the needle a scant to the right and keep using the 5/8 mark as a guide. The needle position setting is shown in the next picture:

I can still use the 5/8 guiding mark and stitch accurately a little less than 5/8 from the edge, placing a row of reinforcement stitches around the curved edge

Next the SA is clipped, ending the little cuts close to the row of reinforcement stitches:

These clippings will allow the inward curve to adapt to the outward curve, taking its form, right sides facing. Just pin the two pieces together as shown:

Then stitch, removing the pins as you go. Don’t forget to change the setting of the needle position so it stands centered and 5/8 from the edge. You’ll be stitching just next to the reinforcement stitches:

I want to press the SAs to the inset side so I need to notch the yoke SA, otherwise it won’t lie flat:

I basted the SAs in place and pressed:


Then I topstitched on the right side, and removed the hand basting:

As a final step I graded the SAs to reduce bulk:

And that’s all for today! See you guys soon!

Corte do forro – Cutting the lining

Português
English (uncheck the other box and check this one)

Normalmente as revistas de moldes não fornecem moldes para o forro das peças. Neste caso específico apenas é fornecido o molde para o forro da parte superior da frente (frente sem encaixe) e para as restantes peças do forro temos que adaptar o molde. A primeira coisa que faço é modificar as bainhas que acrescentei, passando-as de 4cm para 1,5cm. Outro passo importante é descontar a largura das vistas e depois adicionar valores de costura (1,5cm) nas margens de onde retirámos as vistas. Outra alteração normal é cortar o molde das costas na dobra do tecido deixando um excedente para depois construir uma prega no forro. Podem ver na figura seguinte o molde das costas com os valores de costura virados para dentro ao longo do centro das costas; em vez de cortar em toda a volta do molde, deixo a aresta da dobra como está.

No caso deste casaco temos também que acrescentar o encaixe interior do bolso à parte da saia da frente, pois no forro não existe bolso. Para o efeito basta sobrepor a frente ao encaixe, como mostram as figuras:


Esta peça da frente já tem descontada a largura da vista e acrescentados os valores de costura, daí ser mais estreita que a peça que se cortou em tecido.

Nos próximos posts vou mostrar alguns detalhes da construção, em particular como se cose o encaixe da frente e as presilhas dos ombros, uma vez que as instruções são um pouco confusas principalmente para quem não domina bem o Espanhol. Além do mais o desenho técnico do modelo não está correcto quanto às presilhas, o que dificulta ainda mais a interpretação das instruções. Até à próxima!

(NOTA: Esta série de posts foi agendada, e já estava preparada desde o início da semana, uma vez que até à próxima semana estarei demasiado ocupada para escrever nos blogs. Neste momento falta aplicar o forro no casaco para o terminar)


Usually, the pattern magazines don’t include specific pattern pieces for the lining and these pieces must be constructed from the outer shell pattern. In this case the bodice front lining pattern is provided (it’s a whole front without the separate shoulder/armhole yoke piece), but for the remaining lining pattern you must adapt the outer shell pattern. The first step is substituting the hem allowances for the standard seam allowance width. Then, the facing width must be cut off from the pattern pieces, but not all of it: you should add a seam allowance to the edge without the facing. Finally, the back lining piece should be cut roughly 5/8 inches from the fold, to add a wearing ease pleat on the lining center back. Next picture shows the back with the SAs pinned in so you can observe the pleat width on the fold:

Specifically for this coat we have to alter the front skirt pattern because there will be no pockets on the lining. To be able to obtain the lining front skirt pattern, just pin the inner pocket piece to the front skirt pattern, as shown below:


The lining front pattern has the facing width removed and added SAs around the new edge, so it’s narrower than the fabric front skirt piece.

In the next couple of posts I’ll show you some construction details such as how to sew the shoulder/armhole yoke and how to construct the shoulder tabs; the Patrones directions are a little fuzzy on this last matter (the tab design is unusual and I believe the line drawing is inaccurate for the tabs) so I plan to show you how I did my tabs. See you then!

NOTE: This series of posts has been scheduled, and it was written in the beginning of the week; I’ll be too busy to update my blogs until next week. At this point the coat's outer shell is done and next week I plan on sewing the lining and finishing the coat)