2014#17 – The swallows set part 2: the pants – Conjunto andorinha parte 2: as calças


(pictures of me wearing the swallow were published here) 
 
Description: Ankle length pants with faced waistline; the original have side pockets with enclosed buttoned side closure and one back single welt pocket. I skipped both these details and used just the base pattern for my pants with overlapped side zipper instead. 
 
Pattern used: BurdaStyle 2014/04 model 116. 
 
Fabric: Black swallows print neoprene-like knit. 
 
--- 
 
(fotos minhas a usar o conjunto foram publicadas aqui) 
 
Descrição: Calças pelo tornozelo com cintura com vista incorporada; as originais têm bolsos metidos nas aberturas laterais abotoadas (estilo marinheiro) e um bolso avivado atrás; utilizei apena o molde base das calças, omitindo estes detalhes e aplicando um fecho na lateral. 
 
Molde: BurdaStyle 2014/04 modelo116. Material: malha tipo neopreno estampada com andorinhas.
 
Material: malha tipo neopreno estampada com andorinhas.

Here are a few details of the finishing of the pants which were very easy and quick to make (because I skipped the more elaborated details; I believe that it was the best choice for this type of fabric). The faced waistline: 
 
--- 
 
A seguir têm alguns detalhes do acabamento das calças que foram fáceis e rápidas de fazer (muito devido a ter eliminado os detalhes mais elaborados, mas creio ter feito a opção mais acertada dadas as características deste material). A cintura com vista metida e pespontada:
The side-zipper / o fecho na lateral:


The hemming process is quite simple because this knit doesn't run: simply fold the hem allowance to the inside, topstitch it using a narrow zigzag stitch and trim the excess: 
 
--- 
 
Fazer as bainhas é muito fácil pois esta malha não se desmancha; basta dobrar para dentro, pespontar (com um ponto de ziguezague longo e estreito) e aparar o excedente:

There isn't much to say about this pattern: it’s a great basic pattern for pants and I will definitely try the original version with side pockets/closure later. I have yet another sewing review to write (I'm a little behind on reviewing my finished projects) so stay tuned for more! Thank you all so much for reading! 
 
--- 
 
Não há muito mais a dizer sobre este molde, exceto que é um ótimo molde-base; muito provavelmente farei as calças com os detalhes originais, mas utilizando outro tecido. Entretanto tenho ainda mais um projeto para mostrar (ando um pouco atrasada com os artigos de costura), por isso fiquem atentos! Muito obrigada por visitarem!

2014#16 – The swallows set part 1: the top – Conjunto Andorinhas parte 1: o top


Pictures of me wearing the Swallows set are published here.
Description: Overlapped front top with 3/4 sleeves and bounded neckline. 
Pattern Used: BurdaStyle 2014/04, model 115, I cut a 38 without any alterations. I cut the back piece on the fold, omitting the back seam.
Fabric: Neoprene-like swallow print knit in pale pink. I also got the coordinating fabric in black and I plan on making the short pants (BurdaSTyle 2014/04 model 116) with it. 
--- 
Fotos minha sa usar o conjunto Andorinhas foram publicadas aqui.
Descrição: Top com mangas a ¾, frentes sobrepostas e decote avivado. 
Molde: BurdaStyle 2014/04 modelo 115, cortei o tamanho 38 sem modificações. Cortei as costas na dobra do tecido, omitindo assim a costura do meio de trás por não ser necessária.
Tecido: Malha tipo neopreno rosa-claro com estampado de andorinhas. Também tenho a malha coordenada em preto e planeio fazer as calças do conjunto (BurdaStyle 2014/04 modelo 116) com esta malha.


This was a fun and easy top, I am very happy with the end result. Being easy doesn't mean you don’t need to be precise; the mitered corner should be flat and perfect, the top-stitching should be at a constant distance from the edge (I used long & narrow a zigzag stitch to top-stitch). 
--- 
Este top foi fácil e divertido de fazer e fiquei muito satisfeita com o resultado. O facto de ser fácil não implica desleixo nos acabamentos: o canto da frente deve ficar plano e perfeito, o pesponto ao longo das orlas deve estar a uma distância constante das mesmas (para pespontar usei um ponto ziguezague de comprimento 2,5 e largura 0,5).

The outer front edge should match the armhole seam exactly at the shoulder, not being caught by the armhole stitching or being apart from it: 
--- 
A orla de for a da frente deve coincidir exatamente com a costura da manga no ombro, não ficar presa nessa costura nem ficar afastada:

I highly recommend this pattern and I think it will work with a multitude of fabrics, so I plan on using it again. Stay tuned for the pants review and for pictures of me wearing the set at Tany et La Mode, coming up soon! 
--- 
Recomendo vivamente este molde e sei que resultará com vários tipos de tecido, como tal planeio usá-lo mais vezes. Fiquem atentos para o artigo sobre as calças dos conjunto e para fotos minhas a usá-lo, muito em breve no Tany et La Mode!

2014#15: The lip print top – O top estampado de beijos


ETA: Click here to see me wearing the top!

I've made this top out of the remnant fabric from the lip print dress, using the same pattern for the bodice but altering the neckline to a V-line instead. The peplum was made shortening the upper skirt panels of the dress. As you can see, there’s no back zipper this time: 
--- 

Editado para acrescentar: Podem ver-me a usar o top clicando aqui! 

Fiz este top com o tecido que sobrou do vestido estampado de beijos, usando o mesmo molde para o corpo mas alterando o decote. O folho da bainha também foi feito encurtando os panos superiores da saia do vestido. Como podem ver, não precisei de coser um fecho atrás:


The next photo shows the rather unusual armhole shaping of both the dress and the top: 
--- 
Na próxima foto podem ver o detalhe da forma da cava, um detalhe for a do vulgar no vestido e agora no top:

And this sums up my sewing projects during the past vacation week! Hope you all have enjoyed it! Hugs to all!
---
E assim termino de mostrar o que costurei durante esta semana de férias, espero que tenham gostado! Um abraço!

2014#14: The lip print dress – O vestido estampado de beijos


I've made this dress for my birthday party (I turned 43 on the 24th of April and we celebrated with our close family on the 25th). You can see pictures of me wearing the dress on my wardrobe blog (click here). Again I used neoprene fabric which made the construction faster than usual because the armholes, neckline and hem could be left raw. It took about four hours to get the dress completed and I think it turned out quite well. The pattern is a designer pattern from the Milanese duo Aquilano & Rimondi published in the BurdaStyle 2014/01, model 124. I’ve made a few modifications, skipping the raised neckband and changing the zipper placement to the back. When the dress was finished I realized there was no need for the zipper at all because the neoprene stretches just enough to get the dress on without the back closure. Since I planned to leave the neckline, armholes and hem raw, I didn’t add SAs there. There was some fabric left so I was able to make a top out of it as well (to be reviewed next). Enjoy the pictures and thank you so much for visiting! 
--- 
Fiz este vestido para usar na minha festa de anos (fiz 43 anos no dia 24 de Abril, mas só celebrei no dia 25). Podem ver fotos do look completo no meu blogue de estilo pessoal (clicar aqui). Mais uma vez usei tecido tipo neopreno, o que fez com que a construção do vestido fosse mais rápida, pois o decote, as cavas e a bainha puderam ser deixados “a fio”. Demorei cerca de 4 horas a fazer o vestido e acho que ficou bastante bem. O molde é de um modelo de designer, do duo Milanês Aquilano & Rimondi, publicado na BurdaStyle 2014/01, modelo 124. Fiz algumas modificações: não incluí a gola subida e passei o fecho da costura lateral para a costura de trás. Depois do vestido terminado apercebi-me que o fecho foi desnecessário, uma vez que consigo vestir o vestido sema abrir o fecho. Como queria deixar o decote, cavas e bainha a fio, não adicionei estes valores de costura ao molde. Ainda me sobrou um bocado de neopreno, bastante para um top que mostrarei a seguir! Vejam as imagens e obrigada por visitarem!






2014#13 – The Forest Dress – O vestido “Floresta”


When I saw this neoprene fabric I knew I had to make a dress out of it! The landscape print repeats every 90cm (approx. 35”) so this had to be a short tube dress. I copied the pattern directly from a RTW stable knit dress. This has to be the fastest dress I ever made: it took 40 minutes to complete, including copying the pattern from the original dress to paper. The neoprene knit doesn't need finishing so I left the neckline and armhole edges raw, only stitched a narrow hem. Enjoy the pictures; they will do all the talking for me! 
 
--- 
 
Quando vi esta malha tipo neopreno, sabia que tinha de fazer um vestido com ela! O padrão da paisagem repete-se cada 90cm, por isso teria sempre de ser um vestido curto e para tirar partido do padrão, deveria ser o mais simples possível. Resolvi copiar o molde diretamente de um vestido de malha que comprei e creio que bati o meu record da peça mais rápida de fazer de sempre: demorei apenas 40 minutos a fazer o vestido, incluindo o tempo de copiar o molde para papel! Como este tecido não desfia nem desmancha, as orlas do decote e cavas foram deixadas “a fio”, apenas fiz uma bainha estreita para melhorar o caimento do vestido. Vejam as fotos, elas falarão por si próprias!





2014#12 – Sky blue wide pants – Calças largas azul-céu


I've made these pants using the same modified pants pattern that I used for my navy&black set pants (BurdaStyle 2013/12 model 103), only this time I used a woven stretch fabric instead of stable knit. You can see me wearing the sky blue pants at my personal style blog (click here). 
 
--- 
 
Fiz estas calças usando o mesmo molde modificado das calças do meu conjunto marinho e preto (BurdaStyle 2013/12, modelo 103), só que desta vez usei sarja elástica em vez de malha estável. Podem ver-me a usar as calças azul-céu no meu blogue de estilo pessoal (clicar aqui).




Conclusion: This pattern is a winner! Using a different fabric gives it a completely different effect and I also love this version very much! I feel like using this pattern a few more times, perhaps altering a detail here and there,… I could see this pattern used to make some culottes and/or with lace on the side panels; the possibilities are endless when you find a pattern that suits your taste and style and fits perfectly like this one!
 
---
 
Conclusão: Este molde é sem dúvida um must! O facto de usar um tecido diferente dá-lhe outro ar, mas adoro igualmente esta versão, e creio que não me vou ficar por aqui… Consigo imaginar este modelo numas “coulottes” (calças largas curtas) e/ou com painéis laterais em bordado inglês, por exemplo,… Quando se encontra um molde que nos agrada na forma, no estilo e que assenta bem, as possibilidades para o aproveitar são imensas!

2014#11: The owl sheer top – Top de tecido leve estampado com corujas


ETA: You can pictures of me wearing the top on my personal style blog (click here)

This is the first of my short vacation at home sewing projects; I had this cute owl print sheer fabric in my stash and since baby blue is so trendy for this spring I decided to make a top out of it; this top has an accentuated V shaped neckline, wide sleeves and in spite of the recommended fabrics being fabrics with some body like linen or satin, I thought it would perfect for a sheer fabric like chiffon or gauze as well. The pattern used was BurdaStyle 2014/02 model 117: 
--- 
Editado para acrescentar: Podem ver fotos minhas a usar o top no meu blogue de estilo pessoal (clicar aqui)

Este é o primeiro dos projetos concluídos durante a minha semana de férias em casa; tinha este tecido estampado com corujas que acho bastante engraçado e como o azul-bebé está bastante na moda para esta primavera, decidi fazer um top com ele. O top tem um decote em V bastante acentuado e mangas abalonadas, e apesar dos tecidos recomendados serem tecidos com algum corpo (como o linho e o cetim), achei que também ficaria bem com um tecido mais leve e fino como este. O molde usado foi o modelo 117 da BurdaStyle 2014/02:

I’m not going to extend this review because I have a few more garments to be reviewed; I’ll just say that this type of fabric is not easy to cut (I layered it on top of newspaper papers and used a rotary cutter and mat), it’s also not heat resistant, so I had to use the pressing iron on the lower setting and always use a press cloth between the iron and the fabric,…) Applying fusible interfacing to the neckline facing was an adventure on its own and after a few tests I found a low temperature sheer fusible interfacing that worked . The seam treatment was the simplest possible, after stitching (used the thinnest needle available on the sewing machine, size 60) I zigzagged SAs together and trimmed away the excess. 
--- 
Não me vou estender muito no processo de costura pois tenho mais algumas peças para mostrar; vou apenas mencionar que um tecido deste tipo não é fácil de cortar pois é muito escorregadio; estendê-lo sobre folhas de jornal ajuda a mantê-lo direito enquanto se corta e uma lâmina rotativa com tapete de corte próprio é sem dúvida o método de corte que resulta melhor. O tecido também não aguenta temperaturas altas, tive de o passar com o ferro no mínimo e mesmo assim usar sempre um pano fino entre o tecido e o ferro. Aplicar entretela termo-colante à vista do decote foi um filme: depois de várias tentativas lá consegui usar uma entretela muito fina que colava a baixas temperaturas. O acabamento das costuras também foi o mais simples possível: depois de cosidas (usei a agulha mais fina na máquina, tamanho 60), chuleei os valores de costura juntos com ponto ziguezague e aparei rente ao ziguezague.



Conclusion: A nice trendy top that I’ll layering over a strappy top! Loved the end result! Stay tuned for quite a few more garments to be reviewed next!
---
Conclusão: Um top bem na moda para usar sobre um top de alcinhas! Adorei o resultado! Fiquem atentos pois tenho mais algumas peças feitas para mostrar!