2011#37 – “Abrigo T” (pattern by Paco Peralta)

Português
English (uncheck the other box and check this one)

(mais fotos de mim a usar o casaco aqui)

Descrição: Casaco amplo em forma de “T”. Este modelo tem um encaixe na frente e uma gola “em pé” com casa de botão na costura. Os ombros são caídos e as mangas largas têm duas opções: compridas ou a ¾ com uma dobra (no molde da manga estão marcadas as linhas de corte para as duas opções, assim como as diferentes linhas de corte para o forro da manga). Tem bolsos metidos na costura lateral e é completamente forrado.

Molde: Original Alta-Costura de Paco Peralta (disponível para compra aqui). O molde está escalado em 3 tamanhos (P, M e L – ver especificações na página ETSY do molde), eu cortei o M. É fornecido numa folha contínua de papel vegetal e contém já margens de costura (1,5cm) e bainhas (5cm), pronto a cortar e a colocar sobre o tecido. Também são fornecidos moldes para cortar o forro do casaco.
Tecido usado: Misto de lã e poliéster, efeito “lã feltrada”, comprado na Feira dos Tecidos a 19,95€/m. Usei 2,15m de tecido, com alguma “ginástica” no plano de corte. Quanto ao forro, leva praticamente a mesma metragem.

Mais fotos do casaco:
Confecção: Este casaco é relativamente fácil de confeccionar (o molde não vem com instruções) e o Paco publicou já alguns passo-a-passos muito úteis:


Artigo sobre a confecção industrial (para verem como se aplica o forro ao casaco, obtendo um acabamento industrial): http://uniquedesignerpatterns.blogspot.com/2008/01/chaqueta-confeccin-industrial.html

Aqui vou listar os principais passos na ordem como os segui e também mostrar o processo de aplicação da gola em pé ao casaco:

1º Apliquei entretela termo-colante suave na gola, nas frentes (ao longo do meio da frente e também na vista incorporada, nas bainhas do casaco e das mangas. Apliquei também tiras de entretela para reforçar a entrada dos bolsos.
2º - Cosi o encaixe da frente às partes de baixo da frente, deixando a abertura para a casa de botão na frente direita e na respectiva vista incorporada
3º - Cosi a costura do meio das costas
4º - Cosi as costuras dos ombros
5º - Cosi as mangas abertas na costura das cavas
6º - Reforcei todo o decote com um pesponto
7º - Cosi as costuras laterais do casaco (deixando as aberturas para os bolsos) e, em continuação, as costuras das mangas
8º - Confeccionei os bolsos metidos na costura
9º - Cosi o encaixe da frente em forro às partes inferiores da frente
10º - Cosi as partes da frente em forro às vistas da frente
11º - Cosi a costura do meio de trás do forro, deixando uma prega como indicado no molde; reforcei o decote com um pesponto
12º – Cosi a costura dos ombros das costas em forro aos ombros da frente+ vistas, obtendo uma abertura circular, onde se aplicará a gola em pé:
13º – Cosi e virei a gola, golpeando nos cantos:
14º - Inseri a gola na abertura, golpeando ao longo dos valores de costura da abertura, reforçados com um pesponto:
15º - Depois de coser a toda a volta (não esquecer de deixar as aberturas para a casa de botão aqui também), dei uns piques nos valores de costura da gola, abri as costuras a ferro evirei tudo para o direito. Cosi as costuras sobrepostas com pontos atrás mesmo na linha da costura e assentei tudo a ferro:
16º - Prossegui com a confecção do forro, cosendo as mangas às cavas e depois fechando a costura lateral e a das mangas na continuação. Deixei uma abertura no forro numa das mangas, para poder virar o casaco depois de aplicar o forro pelo método industrial
17º - Apliquei o forro pelo método industrial, virei o casaco para o direito, alinhavei todas as bainhas no lugar, alinhavei também as vistas da frente à frente na sua posição definitiva, virei de novo para o avesso, cosi as bainhas à mão, cosi as vistas à frente do casaco, tudo no avesso. Depois foi só virar o casaco para o direito pela abertura no forro e fechar a abertura com pontos à mão.
18º - Dei uns pontos invisíveis à mão nas casas de botão e apliquei os botões; depois de uma última passagem a ferro ao casaco e ao forro, o trabalho está concluído!

Modificações ao molde: As mangas na opção A são bastante compridas; acabei por fazê-las mais curtas 6cm, obtendo assim umas bainhas mais largas que permitem usar as mangas com punhos virados, como mostro a seguir:
Mais detalhes:

Os botões são muito giros na minha opinião:
Os bolsos metidos nas costuras:
Eis o forro:
Os cantos em baixo, confeccionados pelo método industrial explicado pelo Paco:
A etiqueta do criador (fornecida junto com o molde) e a minha etiqueta:
Conclusão: Um excelente molde, como aliás o Paco nos tem habituado e para casaco é dos mais fáceis de confeccionar, uma vez que o molde é simples (a gola é bastante fácil, os bolsos idem, e não tem detalhes muito difíceis). Gosto do estilo minimalista e recto, das linhas puras que ao mesmo tempo respeitam a anatomia do corpo e creio que o resultado final foi bem conseguido. Como sempre, podem ver-me a usar este casaco aqui. Beijinhos, obrigada por visitarem e tenham um óptimo fim-de-semana!




(More pictures of me wearing this coat are published here)

Description: Lined T-shaped straight-cut coat, has a front yoke, stand-up collar, in-seam buttonholes and in-seam side pockets. It features dropped shoulder and two options for the sleeves: long or ¾ with turn-ups (there are cutting lines for both options on the pattern, and for the lining as well)

Pattern: Haute-Couture Original by Paco Peralta (available for sale here). The pattern comes graded in three sizes (S, M and L – specifics on the patterns webpage) and I cut the M. It’s drafted by hand on a continuous pattern paper and includes 5/8 seam allowances and 2” hem allowances, ready to be cut and placed on the fabric. The lining pattern is also included.

Fabric: Wool/polyester blend, sort of boiled wool finished, bought locally. I used 2.5 yards of fabric and roughly the same in lining (buy extra fabric, to be safe).

A couple more pictures of the finished coat:

Construction: This is an easy project (I mean for a coat; it’s important to know that this pattern doesn’t include instructions or cutting layouts) and Paco already published some useful tutorials that provide good insight on how to make this coat:



In the present article I will describe the main steps and construction order that I used, showing in more detail the making of the stand-up collar:

1º Apply interfacings (I used soft fusible interfacing, similar to pro-weft interfacing): collar, facings, along center front (roughly facing wide), hem allowances (5 inches wide) and pocket openings.
2º - Stitch the front yoke/facing to the bottom front/facing, leaving openings for the buttonhole on both right front and facing
3º - Stitch the center back seam
4º - Stitch the shoulder seams
5º - Stitch the sleeve pieces to the armholes
6º - Reinforce the neckline stitching near the seam line (you can also reinforce the neckline with fusing tape or a strip of lining selvage; I didn’t because the collar piece is cut on the grain and it is stable enough)
7º - Stitch the side seams (leaving the pocket openings unstitched) and the sleeves seams in a continuous step
8º - Construct the in-seam pockets
9º - Stitch the lining front yoke to the bottom front
10º - Stitch the lining fronts to the front facings
11º - Stitch the lining back seam leaving a fold for ease of movement, as indicated in the pattern
12º –Stitch the lining back to the lining front/facing along the shoulders, obtaining a circular opening, where the collar will be later inserted:

13º – Stitch the collar (folded in half, stitch along the narrow edges not crossing the seam allowance in the collar line, then clip corners and turn to right side)
14º - Insert the collar in the neckline opening, clipping around the reinforced neckline edge;
15º - Stitch all around the collar/neckline (don’t forget to leave the in-seam buttonhole openings where marked on the right front and facing), notch the collar SAs and press the seams open. Turn everything to the right side and backstitch on the ditch around the neckline, making sure the seams match on the right side and lining side. Press one last time
16º - Proceed with the lining construction, stitching the lining sleeves to the lining armholes and then the lining side seams/sleeve seams, all in a continuous step. I left an opening in one of the sleeve seams to be able to turn the coat/lining to the right side once the lining is bagged
17º - I bagged the lining using the industrial method explained by Paco. Turned the coat/lining to the right side and basted the front facings in place, and all the hems; turned the coat/lining to the wrong side again and hand-tacked the hems and the front facing to the front. Turned the coat/lining to the right side, closed the lining opening and removed the bastings
18º - Slipstitched the buttonholes by hand and stitched in the buttons; after one last pressing the coat is finished!

Alterations: The only alteration was shortening the sleeves by a little more than 2”, and because of this I got a wider hem allowance. This way I can also do turn-ups if desired:
More details:

I really love the buttons:
The in-seam pockets:
Here’s the lining:
The facing/hem/lining corner obtained by the industrial bagging method explained by Paco:
The designer’s label (there’s one included with each of Paco’s patterns), along with mine:
Conclusion: This pattern is rated excellent by my book, nothing less should be expected from Paco; everything is carefully marked and labeled, all pattern pieces match perfectly. This coat is fairly easy to make (the collar is very easy, the in-seam pockets are quite straight forward as well; there aren’t any real challenging details). I like the clean straight lines, the minimalistic style yet respecting the body’s anatomical characteristics, and I believe the end result is quite outstanding. As usual, there are more pictures of me wearing this coat here. Have a great weekend and thank you for visiting!

29 comments:

The Hojnackes said...

What a fabulous coat! I think I need that pattern now that I've seen your version. The fabric you used is wonderful!

Beth (SunnyGal Studio) said...

wow I love this coat, color and style. great fabric choice.

Sheila said...

What an Awesome coat and fabulous color.

Rosie said...

Tany, I second what Sheila said above. Paco's patterns are great, aren't they?

Anonymous said...

Your new coat is beautiful, very nice fabric too.

Els

DeniseAngela said...

Wow Tany.....gorgeous coat! Thanks for this tutorial.... I am bookmarking this & your links so when my sewing is up to par I would like to try this! I am on awe of the sewing done by you & Paco.

Cennetta said...

Gorgeous coat.

Carolyn (Diary of a Sewing Fanatic) said...

Simply fabulous! I love everything about it especially the color!

LuCa said...

Lindo casaco!!! Espero um dia conseguir confeccionar tão bem assim! =) Parabéns!

Erica Bunker said...

Beautiful coat!

Adrienne said...

Beautiful Tany!

SewBarbie said...

This is a beautiful coat. The fabric, color and textures are first rate.

Cíntia Pandolfi said...

Tany, está lindo os flocados desse tecido, e que modelo facil de fazer (mas de alto nivel).

Amei a cor também!

aprendizdecostura

Mom (Míriam) said...

Ficou lindo, como sempre. Gostei da idéia da casa embutida na costura da gola. Você costurou a gola neste ponto a mão?
Beijocas.

Jean said...

Love this coat. It is a wonderful minimalist style and the color you chose is gorgeous! I'll have to check out the patterns.

The Slapdash Sewist said...

Just gorgeous! I love your color and those fabulous in-seam buttonholes.

Tany said...

Mom (Míriam): Obrigada! No lugar das casas a costura da gola com as vistas/frente é deixada aberta; quando as margens são assentes a ferro abertas, obtemos duas aberturas, que sobrepostas criam a casa de botão. Para reforçar a abertura dou uns pontos invisíveis à mão unindo gola com gola e frente com vista... Não tenho forma melhor de explicar, só mesmo vc tentando fazer... Beijinhos

Josie said...

Such beautiful work and the coat is very flattering on you!

BCN - UNIQUE designer patterns said...

Muchas gracias Tany.- Que te puedo decir, que estoy emocionado de ver mi modelo, tan bien hecho y tan bien llevado. Muchos besos !!!

Vicki said...

The fabric is really interesting - almost like wool on a sheep. Looks great on you.

Summerset said...

Love it - and such a gorgeous color, too.

Wag Doll said...

Wow this is so gorgeous! The fabric, the texture, the colour, the shape, right down to the hanging chain, perfection! x

AllisonC said...

This is a beautiful coat, the cut looks fabulous and the fabric is such a gorgeous colour and texture.

Polka said...

Amazing and beautiful color coat. Perfect finish the project. Have a nice day

Mamã Martinho said...

O modelo é espetacular! Como tu gosto deste tipo de casacos. O teu resultou muito bem! Gosto também das mangas assim!

Bjs

Mónica

Anne-Marie said...

Thank you Tany for sharing your technique for sewing Paco's pattern. I bought as well and should be sewing it within the next months for my sister. The wool you chose is so great! Wonderful colour and what a great match with the tan gloves !!!

sannalinnea said...

Just adore this coat, I think i have to make a coat similar to this one ! :)
www.sannalinnea.com

Elenice Gonaçlves said...

Tambem achei sensacional a ideia das casas nas aberturas das costuras.
Sua explicação foi perfeita.
Acho muito chik finalizar o trabalho com as etiquetas.
Parabéns novamente.

Unknown said...

Hace tiempo que visito tu blog y es un placer para mi, me encanta la ropa que haces y como posas con ella. Eres una costurera y una modelo de primera. Este es un abrigo precioso y creo que has acertado con el tejido y el color. Sigue así.